Diversey Taski R9

Use Overview

Directions for use

TASKI R4 Shine-Up is a ready-to-use product.

Shake well before use. Spray a little TASKI R4 Shine-Up onto clean cloth. Wipe all wooden surfaces such as tables, bedside tables and chairs. Polish the surfaces to a fine sheen, working TASKI R4 Shine-Up into the grain of the wood.

Can also be used to maintain polished metal surfaces like nameplates, brass handles, etc.

Directions for Use

Wet hands with water.

Apply one or two doses of SoftCare Star H100 Gentle from the dispenser onto hands.

Rub hands together thoroughly to generate a rich lather, covering palms, backs of hands, fingers, and wrists.

Rinse completely under clean running water.

Dry hands thoroughly using a clean towel or air dryer.

Use Overview

Directions for use

Recommended dilution is :

Normal soiling : 20 ml. in 1 litre of water.

Heavy soiling : 50 ml. in 1 litre of water.

For wet mopping, take the solution in bucket and mop, taking care to rinse the mop frequently.

Alternatively, scrub the floor using either a scrubber-drier (like TASKI combimat 500E) or a scrubber (like TASKI ergodisc).

Pick up the dirty solution using a wet vacuum cleaner.

Use Overview

Directions for use

TASKI R5 is a ready-to-use product.

Air freshener is applied last, after all cleaning of the room is finished.

Spray a couple of triggers upwards, away from you, into the centre of the room and close the door.

For very large rooms and also in rooms where tobacco or other odours are very strong, spray additionally as required.

Directions for use

TASKI® R6 is a ready-to-use product.

Shake well before use. Flush the toilet or urinal. Squirt TASKI® R6 from the specially designed squeegee-bottle under the rim, around the bowl, onto water / flush paths and around water outlets. Leave to activate for a few minutes (5 to 10 minutes of contact time, depending upon the bowl condition). Scrub the inside of the bowl with the brush to remove difficult stains. Then flush to rinse the toilet / urinal.

Directions for Use

1. Clean the surface thoroughly using a general kitchen cleaner or detergent and allow to dry.

2. Apply Suma Inox D7.1 sparsely onto a clean, soft, dry cloth or spray lightly directly onto the surface.

3. Buff and wipe along the grain of the stainless steel to achieve a uniform sheen.

Important Precautions

• Food Contact: Do not use on surfaces that come into direct contact with food (e.g., prep tables, cutting surfaces).

• Flooring: Do not apply to floors, as the polished finish can cause slipping hazard.