Diversey Taski R3

Directions for use

TASKI® R6 is a ready-to-use product.

Shake well before use. Flush the toilet or urinal. Squirt TASKI® R6 from the specially designed squeegee-bottle under the rim, around the bowl, onto water / flush paths and around water outlets. Leave to activate for a few minutes (5 to 10 minutes of contact time, depending upon the bowl condition). Scrub the inside of the bowl with the brush to remove difficult stains. Then flush to rinse the toilet / urinal.

Directions for Use

Recommended Dilution Ratios:

• Normal Soiling: 10 ml per 1 litre of water (1% v/v)

• Medium Soiling: 20 ml per 1 litre of water (2% v/v)

• Heavy Soiling: 20 ml to 50 ml per 1 litre of water (2–5% v/v)

Application Methods:

1. Manual Application:

   • Dose the product into a bucket filled with water.

   • Apply the solution to the surface using a mop or stiff brush and allow it to dwell for 15–20 minutes.

   • Scrub thoroughly, pick up dirty solution, and rinse with clean water.

2. Machine Application (Scrubber Drier / Single Disc Machine):

   • Dose 200 ml of product per 10 litres of water in the machine solution tank.

   • Scrub the floor without wet-vacuuming and let the solution act for 5–10 minutes.

   • Scrub a second time, directly wet-vacuum the soiled solution, and rinse with clean water.

Directions for Use

1. Clean the surface thoroughly using a general kitchen cleaner or detergent and allow to dry.

2. Apply Suma Inox D7.1 sparsely onto a clean, soft, dry cloth or spray lightly directly onto the surface.

3. Buff and wipe along the grain of the stainless steel to achieve a uniform sheen.

Important Precautions

• Food Contact: Do not use on surfaces that come into direct contact with food (e.g., prep tables, cutting surfaces).

• Flooring: Do not apply to floors, as the polished finish can cause slipping hazard.

Directions for Use

Wet hands with clean water.

Apply a dose of Soft Care Enhance H1 onto the hands.

Rub hands thoroughly for at least 20 seconds, paying special attention to washing between fingers, backs of hands, and wrists.

Rinse thoroughly with clean water.

Dry hands completely.

Use Overview

Directions for use

Recommended dilution : For normal soiling : 50-100 ml. In 1 litre of water.

Spray TASKI R9 onto clean cloth / sponge. Apply TASKI R9 to all surfaces to be cleaned (sink, tub, tile). Mildly scrub to remove dirt, stains, etc. Pay special attention to taps, soap holders and all other metal surfaces. Rinse with plain water. The flush handle, the toilet seat cover and the outer bowl need to be cleaned and wiped with TASKI R9 after the toilet bowl has been cleaned.

Polish all metal surfaces with a dry cloth leaving them clean and free from smears.

For day-to-day maintenance TASKI R9 can also be used with spray-and-wipe method.

Important : Do not use on acid-sensitive surfaces. Rinse and dry hands after use.

Use Overview

Directions for use

TASKI R4 Shine-Up is a ready-to-use product.

Shake well before use. Spray a little TASKI R4 Shine-Up onto clean cloth. Wipe all wooden surfaces such as tables, bedside tables and chairs. Polish the surfaces to a fine sheen, working TASKI R4 Shine-Up into the grain of the wood.

Can also be used to maintain polished metal surfaces like nameplates, brass handles, etc.