Diversey Taski R6

Directions for Use

Recommended Dilution:

• Normal Soiling: 20 ml per 1 litre of water.

• Heavy Soiling: 50 ml per 1 litre of water.

• Stubborn Spots & Grease Patches: Use TASKI® Spiral directly neat without dilution.

Application Methods:

1. Manual Mopping: Apply diluted solution onto the floor using a mop, scrub if necessary, and rinse off thoroughly.

2. Machine Scrubbing: Fill the solution tank of a single disc machine or scrubber-drier with the diluted product, scrub the surface, and pick up dirty solution.

Directions for Use

1. Clean the surface thoroughly using a general kitchen cleaner or detergent and allow to dry.

2. Apply Suma Inox D7.1 sparsely onto a clean, soft, dry cloth or spray lightly directly onto the surface.

3. Buff and wipe along the grain of the stainless steel to achieve a uniform sheen.

Important Precautions

• Food Contact: Do not use on surfaces that come into direct contact with food (e.g., prep tables, cutting surfaces).

• Flooring: Do not apply to floors, as the polished finish can cause slipping hazard.

Use Overview

Directions for use

TASKI R5 is a ready-to-use product.

Air freshener is applied last, after all cleaning of the room is finished.

Spray a couple of triggers upwards, away from you, into the centre of the room and close the door.

For very large rooms and also in rooms where tobacco or other odours are very strong, spray additionally as required.

Directions for Use

1. Ovens and Grills

1. Turn off equipment and ensure surface temperature is below 80°C (optimum range: 60°C – 80°C).

2. Spray neat product directly onto the target surface using a spray lance or foam trigger.

3. Allow 5 to 30 minutes contact time depending on soil severity.

4. Scrub loose carbon deposits with a scourer or stiff brush.

5. Rinse thoroughly with clean, hot potable water and allow to air dry.

2. Commercial Fryers

1. Drain oil completely and close the drain valve.

2. Fill with water up to the standard oil fill line.

3. Add 100 mL of Suma Grill D9 per 1 L of water (10% solution concentration).

4. Turn on the fryer and bring the solution to a controlled boil for 15 to 30 minutes.

5. Turn off, allow to cool, drain, and scrub remaining residues from heating elements and side walls.

6. Rinse twice with clean, hot water and dry thoroughly.

Directions for Use:

Ready-to-use liquid designed for dispensing via standard top-fill or refill dispensers.

Recommended usage volume is 3 to 5 mL per handwash, offering a cost-effective solution.

Use Overview

Directions for use

TASKI R4 Shine-Up is a ready-to-use product.

Shake well before use. Spray a little TASKI R4 Shine-Up onto clean cloth. Wipe all wooden surfaces such as tables, bedside tables and chairs. Polish the surfaces to a fine sheen, working TASKI R4 Shine-Up into the grain of the wood.

Can also be used to maintain polished metal surfaces like nameplates, brass handles, etc.