Diversey Taski R7

Use Overview

Directions for use

TASKI R4 Shine-Up is a ready-to-use product.

Shake well before use. Spray a little TASKI R4 Shine-Up onto clean cloth. Wipe all wooden surfaces such as tables, bedside tables and chairs. Polish the surfaces to a fine sheen, working TASKI R4 Shine-Up into the grain of the wood.

Can also be used to maintain polished metal surfaces like nameplates, brass handles, etc.

Directions for Use

1. Clean the surface thoroughly using a general kitchen cleaner or detergent and allow to dry.

2. Apply Suma Inox D7.1 sparsely onto a clean, soft, dry cloth or spray lightly directly onto the surface.

3. Buff and wipe along the grain of the stainless steel to achieve a uniform sheen.

Important Precautions

• Food Contact: Do not use on surfaces that come into direct contact with food (e.g., prep tables, cutting surfaces).

• Flooring: Do not apply to floors, as the polished finish can cause slipping hazard.

Directions for Use

Wet hands with clean water.

Apply a dose of Soft Care Enhance H1 onto the hands.

Rub hands thoroughly for at least 20 seconds, paying special attention to washing between fingers, backs of hands, and wrists.

Rinse thoroughly with clean water.

Dry hands completely.

Use Overview

Directions for use

Recommended dilution : 20-50 ml. In 1 litre of water.

Spray TASKI R3 onto clean cloth / sponge and apply to all surfaces to be cleaned. Wipe off with a clean, dry, lint-free cloth.

Directions for Use

Recommended Dilution Ratios:

• Normal Soiling: 10 ml per 1 litre of water (1% v/v)

• Medium Soiling: 20 ml per 1 litre of water (2% v/v)

• Heavy Soiling: 20 ml to 50 ml per 1 litre of water (2–5% v/v)

Application Methods:

1. Manual Application:

   • Dose the product into a bucket filled with water.

   • Apply the solution to the surface using a mop or stiff brush and allow it to dwell for 15–20 minutes.

   • Scrub thoroughly, pick up dirty solution, and rinse with clean water.

2. Machine Application (Scrubber Drier / Single Disc Machine):

   • Dose 200 ml of product per 10 litres of water in the machine solution tank.

   • Scrub the floor without wet-vacuuming and let the solution act for 5–10 minutes.

   • Scrub a second time, directly wet-vacuum the soiled solution, and rinse with clean water.