SoftCare Enhance H1

Use Overview

Directions for use

Recommended dilution : For normal soiling : 50-100 ml. In 1 litre of water.

Spray TASKI R9 onto clean cloth / sponge. Apply TASKI R9 to all surfaces to be cleaned (sink, tub, tile). Mildly scrub to remove dirt, stains, etc. Pay special attention to taps, soap holders and all other metal surfaces. Rinse with plain water. The flush handle, the toilet seat cover and the outer bowl need to be cleaned and wiped with TASKI R9 after the toilet bowl has been cleaned.

Polish all metal surfaces with a dry cloth leaving them clean and free from smears.

For day-to-day maintenance TASKI R9 can also be used with spray-and-wipe method.

Important : Do not use on acid-sensitive surfaces. Rinse and dry hands after use.

Directions for Use

Recommended Dilution:

• Normal Soiling: 20 ml per 1 litre of water.

• Heavy Soiling: 50 ml per 1 litre of water.

• Stubborn Spots & Grease Patches: Use TASKI® Spiral directly neat without dilution.

Application Methods:

1. Manual Mopping: Apply diluted solution onto the floor using a mop, scrub if necessary, and rinse off thoroughly.

2. Machine Scrubbing: Fill the solution tank of a single disc machine or scrubber-drier with the diluted product, scrub the surface, and pick up dirty solution.

Directions for Use:

Ready-to-use liquid designed for dispensing via standard top-fill or refill dispensers.

Recommended usage volume is 3 to 5 mL per handwash, offering a cost-effective solution.

Use Overview

Directions for use

Recommended dilution is :

Normal soiling : 20 ml. in 1 litre of water.

Heavy soiling : 50 ml. in 1 litre of water.

For wet mopping, take the solution in bucket and mop, taking care to rinse the mop frequently.

Alternatively, scrub the floor using either a scrubber-drier (like TASKI combimat 500E) or a scrubber (like TASKI ergodisc).

Pick up the dirty solution using a wet vacuum cleaner.

Directions for Use

1. Ovens and Grills

1. Turn off equipment and ensure surface temperature is below 80°C (optimum range: 60°C – 80°C).

2. Spray neat product directly onto the target surface using a spray lance or foam trigger.

3. Allow 5 to 30 minutes contact time depending on soil severity.

4. Scrub loose carbon deposits with a scourer or stiff brush.

5. Rinse thoroughly with clean, hot potable water and allow to air dry.

2. Commercial Fryers

1. Drain oil completely and close the drain valve.

2. Fill with water up to the standard oil fill line.

3. Add 100 mL of Suma Grill D9 per 1 L of water (10% solution concentration).

4. Turn on the fryer and bring the solution to a controlled boil for 15 to 30 minutes.

5. Turn off, allow to cool, drain, and scrub remaining residues from heating elements and side walls.

6. Rinse twice with clean, hot water and dry thoroughly.

Directions for Use

1. Clean the surface thoroughly using a general kitchen cleaner or detergent and allow to dry.

2. Apply Suma Inox D7.1 sparsely onto a clean, soft, dry cloth or spray lightly directly onto the surface.

3. Buff and wipe along the grain of the stainless steel to achieve a uniform sheen.

Important Precautions

• Food Contact: Do not use on surfaces that come into direct contact with food (e.g., prep tables, cutting surfaces).

• Flooring: Do not apply to floors, as the polished finish can cause slipping hazard.