Softcare Plus H41

Directions for Use

Wet hands with water.

Apply one or two doses of SoftCare Star H100 Gentle from the dispenser onto hands.

Rub hands together thoroughly to generate a rich lather, covering palms, backs of hands, fingers, and wrists.

Rinse completely under clean running water.

Dry hands thoroughly using a clean towel or air dryer.

Use Overview

Directions for use

Recommended dilution : For normal soiling : 50-100 ml. In 1 litre of water.

Spray TASKI R9 onto clean cloth / sponge. Apply TASKI R9 to all surfaces to be cleaned (sink, tub, tile). Mildly scrub to remove dirt, stains, etc. Pay special attention to taps, soap holders and all other metal surfaces. Rinse with plain water. The flush handle, the toilet seat cover and the outer bowl need to be cleaned and wiped with TASKI R9 after the toilet bowl has been cleaned.

Polish all metal surfaces with a dry cloth leaving them clean and free from smears.

For day-to-day maintenance TASKI R9 can also be used with spray-and-wipe method.

Important : Do not use on acid-sensitive surfaces. Rinse and dry hands after use.

Use Overview

Directions for use

TASKI R4 Shine-Up is a ready-to-use product.

Shake well before use. Spray a little TASKI R4 Shine-Up onto clean cloth. Wipe all wooden surfaces such as tables, bedside tables and chairs. Polish the surfaces to a fine sheen, working TASKI R4 Shine-Up into the grain of the wood.

Can also be used to maintain polished metal surfaces like nameplates, brass handles, etc.

Use Overview

Directions for use

TASKI R5 is a ready-to-use product.

Air freshener is applied last, after all cleaning of the room is finished.

Spray a couple of triggers upwards, away from you, into the centre of the room and close the door.

For very large rooms and also in rooms where tobacco or other odours are very strong, spray additionally as required.

Directions for Use

1. Ovens and Grills

1. Turn off equipment and ensure surface temperature is below 80°C (optimum range: 60°C – 80°C).

2. Spray neat product directly onto the target surface using a spray lance or foam trigger.

3. Allow 5 to 30 minutes contact time depending on soil severity.

4. Scrub loose carbon deposits with a scourer or stiff brush.

5. Rinse thoroughly with clean, hot potable water and allow to air dry.

2. Commercial Fryers

1. Drain oil completely and close the drain valve.

2. Fill with water up to the standard oil fill line.

3. Add 100 mL of Suma Grill D9 per 1 L of water (10% solution concentration).

4. Turn on the fryer and bring the solution to a controlled boil for 15 to 30 minutes.

5. Turn off, allow to cool, drain, and scrub remaining residues from heating elements and side walls.

6. Rinse twice with clean, hot water and dry thoroughly.

Use Overview

Directions for use

Recommended dilution is :

Normal soiling : 20 ml. in 1 litre of water.

Heavy soiling : 50 ml. in 1 litre of water.

For wet mopping, take the solution in bucket and mop, taking care to rinse the mop frequently.

Alternatively, scrub the floor using either a scrubber-drier (like TASKI combimat 500E) or a scrubber (like TASKI ergodisc).

Pick up the dirty solution using a wet vacuum cleaner.