TASKI Spiral F11Y

Directions for Use

1. Ovens and Grills

1. Turn off equipment and ensure surface temperature is below 80°C (optimum range: 60°C – 80°C).

2. Spray neat product directly onto the target surface using a spray lance or foam trigger.

3. Allow 5 to 30 minutes contact time depending on soil severity.

4. Scrub loose carbon deposits with a scourer or stiff brush.

5. Rinse thoroughly with clean, hot potable water and allow to air dry.

2. Commercial Fryers

1. Drain oil completely and close the drain valve.

2. Fill with water up to the standard oil fill line.

3. Add 100 mL of Suma Grill D9 per 1 L of water (10% solution concentration).

4. Turn on the fryer and bring the solution to a controlled boil for 15 to 30 minutes.

5. Turn off, allow to cool, drain, and scrub remaining residues from heating elements and side walls.

6. Rinse twice with clean, hot water and dry thoroughly.

Directions for use

TASKI® R6 is a ready-to-use product.

Shake well before use. Flush the toilet or urinal. Squirt TASKI® R6 from the specially designed squeegee-bottle under the rim, around the bowl, onto water / flush paths and around water outlets. Leave to activate for a few minutes (5 to 10 minutes of contact time, depending upon the bowl condition). Scrub the inside of the bowl with the brush to remove difficult stains. Then flush to rinse the toilet / urinal.

Directions for Use

Recommended Dilution Ratios:

• Normal Soiling: 10 ml per 1 litre of water (1% v/v)

• Medium Soiling: 20 ml per 1 litre of water (2% v/v)

• Heavy Soiling: 20 ml to 50 ml per 1 litre of water (2–5% v/v)

Application Methods:

1. Manual Application:

   • Dose the product into a bucket filled with water.

   • Apply the solution to the surface using a mop or stiff brush and allow it to dwell for 15–20 minutes.

   • Scrub thoroughly, pick up dirty solution, and rinse with clean water.

2. Machine Application (Scrubber Drier / Single Disc Machine):

   • Dose 200 ml of product per 10 litres of water in the machine solution tank.

   • Scrub the floor without wet-vacuuming and let the solution act for 5–10 minutes.

   • Scrub a second time, directly wet-vacuum the soiled solution, and rinse with clean water.