TASKI Spiral HD

Directions for Use

1. Ovens and Grills

1. Turn off equipment and ensure surface temperature is below 80°C (optimum range: 60°C – 80°C).

2. Spray neat product directly onto the target surface using a spray lance or foam trigger.

3. Allow 5 to 30 minutes contact time depending on soil severity.

4. Scrub loose carbon deposits with a scourer or stiff brush.

5. Rinse thoroughly with clean, hot potable water and allow to air dry.

2. Commercial Fryers

1. Drain oil completely and close the drain valve.

2. Fill with water up to the standard oil fill line.

3. Add 100 mL of Suma Grill D9 per 1 L of water (10% solution concentration).

4. Turn on the fryer and bring the solution to a controlled boil for 15 to 30 minutes.

5. Turn off, allow to cool, drain, and scrub remaining residues from heating elements and side walls.

6. Rinse twice with clean, hot water and dry thoroughly.

Directions for Use

Wet hands with clean water.

Apply a dose of Soft Care Enhance H1 onto the hands.

Rub hands thoroughly for at least 20 seconds, paying special attention to washing between fingers, backs of hands, and wrists.

Rinse thoroughly with clean water.

Dry hands completely.

Directions for Use:

Ready-to-use liquid designed for dispensing via standard top-fill or refill dispensers.

Recommended usage volume is 3 to 5 mL per handwash, offering a cost-effective solution.

Directions for Use

Wet hands with water.

Apply one or two doses of SoftCare Star H100 Gentle from the dispenser onto hands.

Rub hands together thoroughly to generate a rich lather, covering palms, backs of hands, fingers, and wrists.

Rinse completely under clean running water.

Dry hands thoroughly using a clean towel or air dryer.

Use Overview

Directions for use

Recommended dilution : 20-50 ml. In 1 litre of water.

Spray TASKI R3 onto clean cloth / sponge and apply to all surfaces to be cleaned. Wipe off with a clean, dry, lint-free cloth.

Directions for Use

1. Clean the surface thoroughly using a general kitchen cleaner or detergent and allow to dry.

2. Apply Suma Inox D7.1 sparsely onto a clean, soft, dry cloth or spray lightly directly onto the surface.

3. Buff and wipe along the grain of the stainless steel to achieve a uniform sheen.

Important Precautions

• Food Contact: Do not use on surfaces that come into direct contact with food (e.g., prep tables, cutting surfaces).

• Flooring: Do not apply to floors, as the polished finish can cause slipping hazard.