Category Box Banner With Product
TASKI Spiral HD
Directions for Use
Recommended Dilution Ratios:
-
Normal Soiling: 10 ml per 1 litre of water (1% v/v)
-
Medium Soiling: 20 ml per 1 litre of water (2% v/v)
-
Heavy Soiling: 20 ml to 50 ml per 1 litre of water (2–5% v/v)
Application Methods:
-
Manual Application:
-
Dose the product into a bucket filled with water.
-
Apply the solution to the surface using a mop or stiff brush and allow it to dwell for 15–20 minutes.
-
Scrub thoroughly, pick up dirty solution, and rinse with clean water.
-
-
Machine Application (Scrubber Drier / Single Disc Machine):
-
Dose 200 ml of product per 10 litres of water in the machine solution tank.
-
Scrub the floor without wet-vacuuming and let the solution act for 5–10 minutes.
-
Scrub a second time, directly wet-vacuum the soiled solution, and rinse with clean water.
-
TASKI Spiral F11Y
Directions for Use
Recommended Dilution:
-
Normal Soiling: 20 ml per 1 litre of water.
-
Heavy Soiling: 50 ml per 1 litre of water.
-
Stubborn Spots & Grease Patches: Use TASKI® Spiral directly neat without dilution.
Application Methods:
-
Manual Mopping: Apply diluted solution onto the floor using a mop, scrub if necessary, and rinse off thoroughly.
-
Machine Scrubbing: Fill the solution tank of a single disc machine or scrubber-drier with the diluted product, scrub the surface, and pick up dirty solution.
Suma Inox D7.1
Directions for Use
-
Clean the surface thoroughly using a general kitchen cleaner or detergent and allow to dry.
-
Apply Suma Inox D7.1 sparsely onto a clean, soft, dry cloth or spray lightly directly onto the surface.
-
Buff and wipe along the grain of the stainless steel to achieve a uniform sheen.
Important Precautions
-
Food Contact: Do not use on surfaces that come into direct contact with food (e.g., prep tables, cutting surfaces).
-
Flooring: Do not apply to floors, as the polished finish can cause slipping hazard.
Suma Grill D9
Directions for Use
1. Ovens and Grills
-
Turn off equipment and ensure surface temperature is below 80°C (optimum range: 60°C – 80°C).
-
Spray neat product directly onto the target surface using a spray lance or foam trigger.
-
Allow 5 to 30 minutes contact time depending on soil severity.
-
Scrub loose carbon deposits with a scourer or stiff brush.
-
Rinse thoroughly with clean, hot potable water and allow to air dry.
2. Commercial Fryers
-
Drain oil completely and close the drain valve.
-
Fill with water up to the standard oil fill line.
-
Add 100 mL of Suma Grill D9 per 1 L of water (10% solution concentration).
-
Turn on the fryer and bring the solution to a controlled boil for 15 to 30 minutes.
-
Turn off, allow to cool, drain, and scrub remaining residues from heating elements and side walls.
-
Rinse twice with clean, hot water and dry thoroughly.
SoftCare Star H100
Directions for Use
Wet hands with water.
Apply one or two doses of SoftCare Star H100 Gentle from the dispenser onto hands.
Rub hands together thoroughly to generate a rich lather, covering palms, backs of hands, fingers, and wrists.
Rinse completely under clean running water.
Dry hands thoroughly using a clean towel or air dryer.
SoftCare Enhance H1
Directions for Use
Wet hands with clean water.
Apply a dose of Soft Care Enhance H1 onto the hands.
Rub hands thoroughly for at least 20 seconds, paying special attention to washing between fingers, backs of hands, and wrists.
Rinse thoroughly with clean water.
Dry hands completely.
Category Box Only Product
TASKI Spiral HD
Directions for Use
Recommended Dilution Ratios:
-
Normal Soiling: 10 ml per 1 litre of water (1% v/v)
-
Medium Soiling: 20 ml per 1 litre of water (2% v/v)
-
Heavy Soiling: 20 ml to 50 ml per 1 litre of water (2–5% v/v)
Application Methods:
-
Manual Application:
-
Dose the product into a bucket filled with water.
-
Apply the solution to the surface using a mop or stiff brush and allow it to dwell for 15–20 minutes.
-
Scrub thoroughly, pick up dirty solution, and rinse with clean water.
-
-
Machine Application (Scrubber Drier / Single Disc Machine):
-
Dose 200 ml of product per 10 litres of water in the machine solution tank.
-
Scrub the floor without wet-vacuuming and let the solution act for 5–10 minutes.
-
Scrub a second time, directly wet-vacuum the soiled solution, and rinse with clean water.
-
TASKI Spiral F11Y
Directions for Use
Recommended Dilution:
-
Normal Soiling: 20 ml per 1 litre of water.
-
Heavy Soiling: 50 ml per 1 litre of water.
-
Stubborn Spots & Grease Patches: Use TASKI® Spiral directly neat without dilution.
Application Methods:
-
Manual Mopping: Apply diluted solution onto the floor using a mop, scrub if necessary, and rinse off thoroughly.
-
Machine Scrubbing: Fill the solution tank of a single disc machine or scrubber-drier with the diluted product, scrub the surface, and pick up dirty solution.
Suma Inox D7.1
Directions for Use
-
Clean the surface thoroughly using a general kitchen cleaner or detergent and allow to dry.
-
Apply Suma Inox D7.1 sparsely onto a clean, soft, dry cloth or spray lightly directly onto the surface.
-
Buff and wipe along the grain of the stainless steel to achieve a uniform sheen.
Important Precautions
-
Food Contact: Do not use on surfaces that come into direct contact with food (e.g., prep tables, cutting surfaces).
-
Flooring: Do not apply to floors, as the polished finish can cause slipping hazard.
Suma Grill D9
Directions for Use
1. Ovens and Grills
-
Turn off equipment and ensure surface temperature is below 80°C (optimum range: 60°C – 80°C).
-
Spray neat product directly onto the target surface using a spray lance or foam trigger.
-
Allow 5 to 30 minutes contact time depending on soil severity.
-
Scrub loose carbon deposits with a scourer or stiff brush.
-
Rinse thoroughly with clean, hot potable water and allow to air dry.
2. Commercial Fryers
-
Drain oil completely and close the drain valve.
-
Fill with water up to the standard oil fill line.
-
Add 100 mL of Suma Grill D9 per 1 L of water (10% solution concentration).
-
Turn on the fryer and bring the solution to a controlled boil for 15 to 30 minutes.
-
Turn off, allow to cool, drain, and scrub remaining residues from heating elements and side walls.
-
Rinse twice with clean, hot water and dry thoroughly.
SoftCare Star H100
Directions for Use
Wet hands with water.
Apply one or two doses of SoftCare Star H100 Gentle from the dispenser onto hands.
Rub hands together thoroughly to generate a rich lather, covering palms, backs of hands, fingers, and wrists.
Rinse completely under clean running water.
Dry hands thoroughly using a clean towel or air dryer.
SoftCare Enhance H1
Directions for Use
Wet hands with clean water.
Apply a dose of Soft Care Enhance H1 onto the hands.
Rub hands thoroughly for at least 20 seconds, paying special attention to washing between fingers, backs of hands, and wrists.
Rinse thoroughly with clean water.
Dry hands completely.
Softcare Plus H41
Directions for Use:
Ready-to-use liquid designed for dispensing via standard top-fill or refill dispensers.
Recommended usage volume is 3 to 5 mL per handwash, offering a cost-effective solution.
Diversey Taski R9
Use Overview
Directions for use
Recommended dilution : For normal soiling : 50-100 ml. In 1 litre of water.
Spray TASKI R9 onto clean cloth / sponge. Apply TASKI R9 to all surfaces to be cleaned (sink, tub, tile). Mildly scrub to remove dirt, stains, etc. Pay special attention to taps, soap holders and all other metal surfaces. Rinse with plain water. The flush handle, the toilet seat cover and the outer bowl need to be cleaned and wiped with TASKI R9 after the toilet bowl has been cleaned.
Polish all metal surfaces with a dry cloth leaving them clean and free from smears.
For day-to-day maintenance TASKI R9 can also be used with spray-and-wipe method.
Important : Do not use on acid-sensitive surfaces. Rinse and dry hands after use.







